fanttik F2 Master Bedienungsanleitung Seite 15

Charging the tool
Be sure to charge tool prior to initial use.
2
Insert cable into type-c port(9) of rotary tool .charge tool using 5V/≤4A power adapter.
1
Plug power adapter into standard power outlet.
Charging indicator
The battery charge indicator (8) indicates the charging progress. During the charging process,
the indicator light (8) will flashing . The battery is fully charged when the indicator light turns ON . Charge time
is approximately 60 minutes.It is normal for the handle of the tool to get warm during charging.
Note: It is recommended to charge the tool every 2 months during storage. Prolonged storage may cause the battery to have a low
charge level. When the battery level falls below the normal charging threshold, the charger will supply a low current to the tool, and the
charging indicator (8) will not respond. Once the battery level is restored to the normal charging threshold, the charging indicator (8) will
initially flash slowly for 2 seconds before starting to flash normally.
Power indicator
This tool is equipped with a power indicator (8) that tells you how much charge your battery has.When the power indicator light (8) is red,
the battery is almost empty. When the red light flashes, the machine will stop shortly.
- 09 -