Reprostativ / führungssäule mit manueller höhenverstellung (8 Seiten)
Inhaltszusammenfassung für Kaiser Fototechnik RSP 2motion
Seite 1
Bedien Sondervariante 1123.qxp_5710 Bedien 07.11.23 14:06 Seite 5710_Bedien_Sondervariante_1123.qxp_5710_Bedien 07.11.23 14:06 Seite 1 Kaiser 2motion Kaiser RSP 2motion Reprostativ / Copy Stand (5710) Reprostativ / Copy Stand (5710) Führungssäule / Column (5708) Führungssäule / Column (5708) Kaiser Xtra Kaiser RSP Xtra...
Gebrauch Arbeitsplatte 1. Bestimmungsgemäßer Gebrauch Arbeitsplatte Sockel Sockel Die Reprostative bzw. Führungssäulen RSP 2motion und RSP Die Reprostative bzw. Führungssäulen RSP 2motion und RSP Aufstellfuß Aufstellfuß Xtra sind als Haltevorrichtungen für Kameras konzipiert. Xtra sind als Haltevorrichtungen für Kameras konzipiert. Sie Höhenverstellbaren...
Betrieb. und Fernsehkameras bis zu einem Gewicht von 10 kg (bei nehmen Sie die Geräte keinesfalls in Betrieb. RSP 2motion) bzw. 15 kg (bei RSP Xtra) geeignet. RSP 2motion) bzw. 15 kg (bei RSP Xtra) geeignet. 2. Montage 2. Montage...
Gesamthöhe mit Aufstellfuß: 227 cm platte (4) bei RSP 2motion erfolgt motorisch über die Kabel- platte (4) bei RSP 2motion erfolgt motorisch über die Kabel - Benötigte Stellfläche (B x T): Benötigte Stellfläche (B x T): 129 x 164 cm...
1. Intended 1. Intended use Camera carrier Camera carrier The RSP 2motion und RSP Xtra Copy Stands and Columns The RSP 2motion und RSP Xtra Copy Stands and Columns Base board Base board are designed as holding devices for cameras. They are used are designed as holding devices for cameras.
Additionally with RSP Xtra Copy Stand (5711): Additionally with RSP Xtra Copy Stand (5711): kg (22 lbs.) (RSP 2motion) resp. 15 kg (33 lbs.) (RSP Xtra). kg (22 lbs.) (RSP 2motion) resp. 15 kg (33 lbs.) (RSP Xtra). - Column foot (6) with base (5)
SW2 (2 mm) hex key. Make sure you do not evenly with the SW2 (2 mm) hex key. Make sure you do not For RSP 2motion Copy Stand and Column (5710. 5708): For RSP 2motion Copy Stand and Column (5710, 5708): overtighten the adjusting screws.
Seite 12
5710 Bedien Sondervariante 1123.qxp_5710 Bedien 07.11.23 14:06 Seite 5710_Bedien_Sondervariante_1123.qxp_5710_Bedien 07.11.23 14:06 Seite 12...