Keychron M7 Benutzerhandbuch Seite 5

Bluetooth Mode Instructions
•
Activate Bluetooth Mode: Switch the mouse to "B" mode for Bluetooth. The mouse will then
automatically activate its Bluetooth pairing mode and the indicator will start to flash blue
slowly.
•
Pairing the Device: Open the Bluetooth settings on your device, search for "Keychron M7",
and select "connect" to pair with the mouse.
•
Indicator during Pairing: During the pairing process, the mouse indicator will blink blue for 3
minutes. If the mouse fails to connect within this time, the indicator will turn off.
•
Reconnecting: If you need to reconnect or the initial connection fails, press and hold the
"Left button + Forward button" for 4 seconds to re-enter pairing mode. The indicator will
begin to blink blue again.
•
Pairing a New Device: If pairing the mouse with a new device while it is still in Bluetooth
mode, hold both the "Left button + Forward button" for 4 seconds until the blue light flashes,
indicating that the mouse is ready to pair with another device.
Type-C Cable
Extension
Adapter
Simultaneously hold for 4 seconds.
To enter the forced pairing mode.
2.4 Ghz Receiver
5