Keychron M7 Benutzerhandbuch Seite 4

3 Modes of Connection
Wired Mode:
•
Ensure the mode switch is set to "c" for wired connection. The mouse will not operate if the
cable is disconnected.
•
Attach the cable to the Type-C port of the mouse and the USB port on your device. The
mouse is ready for use once the indicator light activates.
Note: The mouse automatically defaults to wired mode when connected by cable,
o
regardless of the position of the mode toggle.
2.4GHz Mode:
•
Switch to "G" for 2.4GHz wireless mode. The mouse automatically initiates pairing and the
indicator will slowly blink green.
•
Connect the 2.4GHz receiver to your device's USB/Type-C port. A successful connection will
be indicated by the green light remaining on for 3 seconds before turning off. The mouse is
then ready for use.
•
If the mouse does not connect within 3 minutes, it will stop attempting to pair. To reconnect,
press and hold the "Left button + Forward button" for 4 seconds to re-enter pairing mode.
To repair the connection in 2.4GHz mode, first disconnect the 2.4GHz receiver. Press
o
and hold the "Left button + Forward button" for 4 seconds until the green light starts
flashing, then reconnect the receiver.
4