Set Up Procedure For F-102, F-142 And F-162 - piezosystemjena F-102 Bedienungsanleitung

8 Set up procedure for F-102, F-142 and F-162

Please review the necessary power supply and the correct wiring.
(details see technical data)
If the multicolor LED is illuminated, the switch is in operating mode (orange: channel 1 is
switched, green: channel 2 is switched).
With the switch "TEST", you can set up a test-mode, the device operates at frequency of 1 Hz.
Input (white) LED
not connected orange
HIGH orange
LOW green
The following are possibilities for controlling the switch:
For controlling of the switch please use:
Input: control cable 1 m length (part. no. Z-950-30)
Power: power supply modul 3...12 V DC (part. No. Z-950-20)
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.de
CEO: Dr. Bernt Götz • phone +493641/66880 • fax +493641/668866 •
Channel
1
1
2
www.piezosystem.com
14