Tylo Relay box Pro Control Bedienungsanleitung Seite 8

ENGLISH
Explanation of modular contactor
Pin: 4
1
Pin: 1 2 3 4
Fig. Modular plug/modular contactor, relay board "high" and multithreaded lead
1. Modular plug RJ10, used with cable (max. cable cross-section for connection of modular plug: 0.14-0.20 mm² / AWG26-AWG24)
2. Modular jack RJ10, connected to relay board and control panel
3. Relay board "high" (Pos. 6-9 white connectors)
4. Cable/lead connected to the modular plug must be multithreaded
Pos
1 - NTC Temp. sensor in the room
External switch
2 - EXT
SWITCH
External switch with LED indica-
tion
Door contact (NO)
3 - DOOR
SWITCH
Door contact (NO) with an exter-
nal alarm indication
Combined tempe-
rature sensor/cut-
out in the room
4 - SEC/NTC
Adapter for activation of opera-
ting status
5 - ADD-ON Extra relay board
Control panels
Temp./Humidity sensor %
6-9 - RS485
Synchronisation cable A/B
Table: Description of relay board connections
NOTE! Crimp pliers are needed if changing modular
cabling, e.g. shortening wires.
3 2 1
2
3
Unit Use pin
2, 3
3, 4
2, 3, 4
3, 4
2, 3, 4
Temp. sensor
2, 3
10kΩ
Temperatu-
re cut-out 1, 4
130°C
1, 4
1, 2, 3, 4,
5, 6, 7, 8
1, 2, 3, 4
1, 2, 3, 4
1, 2
1 2 3 4 5
6 7 8 9
Comment
10kΩ. Not in use
Start/stop operation.
Constant or impulse
deactivation.
Start/stop operation.
12VDC max. 40mA.
Tylö Item no.: 90908048
Tylö Item no.: 90908035
12VDC max. 40mA.
External junction box, not
for sale.
Steam Commercial
Note: Not for network
connection.
Tylö Elite and Pure con-
trol panels.
Combi heater with Elite
control panel and Tyla-
rium.
Multisteam and Tylarium.
Primary and secondary
units.
Cable
Solid conductor
Cable
4
Stranded conductor
OK!
Pin1 Pin 2
Not use 10kΩ
Not use Not use Switch
Not use Led GND Switch
Not use Not use Switch
Not use Led GND Switch
Sec 10kΩ
Sec Not use Not use
A (RS485) B (RS485)
A (RS485) B (RS485)
A (RS485) B (RS485) Not use
Max. Ø3,6mm
Pin 3 Pin 4
10kΩ Not use
Switch
Switch /
Led 12V
Switch
Switch /
Led 12V
10kΩ Sec
Sec
12V GND
12V GND
Not use