Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Livoo Sl265 Bedienungsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
6. WARNING: disconnect the USB cable or adapter (not supplied) before cleaning the
device.
7. Cleaning and user maintenance shall not be made by children without supervision.
8. Never immerse the device in water or any other liquid.
9. Unplug the unit :
- when an incident occurs.
- before cleaning the unit.
- if you are not going to use the product for a long time.
10. Do not insert any objects into the unit.
11. This appliance is intended for home use only.

Technical Specifications

Input: DC 3V, 0.5A batteries : 2 X AAA non incluses
Diagram of the device: Figure 1
1
Mode Button
2
Memory button
3
+ Button
4
Button-
Figure 2
1
Indoor Temperature
2
Trend of interior temperature
3
Trend in changes in atmospheric pressure
4
Weather Forecast
5
Outdoor temperature trend
6
Hour
Do not mix new and used batteries. Do not mix alkaline, standard and/or rechargeable batteries.
Note: When the display unit is powered by a battery only, the backlight is turned off to conserve the
battery. Press the SNZ/LIGHT button to turn on the backlight for 10 seconds.
Setting up the weather station
Place it in a dry place that is free of dirt and dust. It should rest on a flat, stable surface.
Important instructions
To ensure accurate temperature measurement, place the weather station and outdoor probe out of
direct sunlight and away from any heat sources or ventilation. They must be within 60 metres of each
other.
To maximize wireless range, place devices away from large metal objects, thick walls, metal surfaces, or
other objects that may limit wireless communication.
To avoid interference, place them at least 2.5 m away from electronic devices (television, computer,
microwave, radio, etc.).
Placement of the external probe
The probe should be placed outdoors to detect weather conditions. It is water-resistant and designed
for outdoor use. However, to avoid damaging it, place the probe in a place protected from weather
events and direct sun. The best location is 1.20m to 2.40m above the ground, in the shade and in a place
where there is good air circulation.
5
Temperature Alarm Button: Upper and Lower Thresholds.
6
Light button
7
Compartment and support
7
Month
8
Day
9
Outside temperature
10
Receive channel
11
Outdoor temperature overheating alarm
12
Outdoor probe
www.livoo.fr
Inhaltsverzeichnis
loading

Inhaltsverzeichnis