Operation; Bt Connection - Audizio Rp337 Bedienungsanleitung

Note: This device is designed to save power in accordance with the ERP energy-saving standard. If there is no audio input for
15 minutes, the device will automatically power off. To turn it back on and resume playback, briefly press the multi-function
knob. For the two bookshelf speakers, if there is no audio input for 5 minutes, they will automatically turn off.
PHONO Operation
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Gently remove the protective needle cover.
3. Rotate the volume control knob to just above the minimum level and turn on the power.
4. Short press the multi-function knob to PHONO mode. You will hear prompt voice to remind you enter PHONO mode
(Note: The indicator light will be solid Blue).
5. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to the record. Use
the 45rpm adapter if necessary.
6. Open the tone arm clip to release the tone arm. Push the lift lever backwards to raise the tone arm and gently move
the tone arm to the desired position over the record. The turntable will begin to spin when the tonearm is moved
towards the record. Push the lift lever forwards to lower the tone arm slowly onto the desired position on the record
to start playback.
7. Rotate the volume control knob to adjust the volume.
Wireless Bookshelf Speakers Operation
1. Short press the power button on both wireless bookshelf speakers to turn them on.
2. Double press the BT button on one speaker to enter TWS mode. When the two speakers are successfully connected,
the white indicator light will turn on with the TWS sign, and you will hear a prompt tone confirming the connection.
3. On your mobile phone or other device, search for the BT pairing name "Audizio RP337" and connect to it. Once
connected, you will hear a prompt tone and the two bookshelf speakers will be paired, delivering stereo sound.
4. Double press the BT button to exit TWS mode. Each speaker can now be used individually, allowing you to take one
on the go while leaving the other at home.
5. Each bookshelf speaker features 1×15W bass output and 1×10W tweeter, providing strong, clear, and detailed sound
that fills any room. If no audio input is detected for 5 minutes, the speakers will turn off automatically.
Note:
•
If normal operation cannot be obtained, unplug the power cord from the outlet and plug it in again.
•
Before using the PHONO function, make sure the two wireless bookshelf speakers are already successfully
connected to each other. Then press the multi-function knob to switch to BT OUT. The indicator light will flash first,
and once connected it will change to a solid light. When the turntable is connected to the wireless speakers, the
PHONO function can be used normally.
•
This turntable player can also be connected to your passive wired external speakers (Which are not included). Plug
the speakers into the R/L channel inputs. Once connected, you can use the BT IN, BT OUT, or PHONO functions with
your wired external speakers.
BT Operation:
1. Turn on the turntable and make sure the tonearm is on the rest. Short press the multi-function knob to BT-mode. You
will hear prompt voice to remind you enter BT mode. (Note: the indicator light will be flashing blue)
2. Turn on the BT-function on your mobile phone or tablet, search for "Audizio RP337" and initiate pairing. When
pairing is successful, the record player will emit a sound. You can now play your music from your mobile phone or
tablet.
3. Rotate the volume control to adjust the volume (the volume control of the mobile phone or tablet can also affect the
total volume).
BT Output Operation:
1. Place the audio device that supports BT-technology as close to your turntable as possible.
2. After turning on the product, short press the multi-function knob to BT-out function. You will hear prompt voice to
remind you enter BT-out function (Note: The indicator light will be flashing Blue).
3. Turn on the BT-function on the device that you want and initiate pairing. When pairing is successful, the indicator
light will be solid blue. If pairing is unsuccessful, make sure your audio device is not paired/connected to another BT
device.
Note:
•
For normal operation using PHONO or BT IN, passive wired external speakers (not included) must be connected to
the R/L outputs. Without these speakers, no sound will be produced.
•
When using BT OUT to connect two wireless bookshelf speakers, the PHONO function will produce sound via the
wireless speakers, so no passive wired external speakers are needed in this case.
•
This turntable features BT output which is a device that transmits audio from this turntable to another BT device
such as wireless BT headphones, BT speakers, or other BT receiving devices.
6