Unpacking Instruction; Product Overview - Audizio Rp337 Bedienungsanleitung

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately.
The arising condensation water might damage your device. Leave the device switched off until it has reached room
temperature.
1. 15W External Bookshelf speaker
2 wireless BT speakers with built-in battery (3000mAh).
2. Main product (Record player) of RP337
3. Multi-function knob
Phono, BT in, BT out, stand-by and volume knob.
Short press to turn on the turntable. Short press (while on) to
change mode. Long press to enter standby function.
4. Indicator light for function
The indicator light flashes blue in BT IN or BT OUT mode when
disconnected, and stays solid when connected. In PHONO mode,
the light remains solid.
5. Platter
Place your record here
6. Transit screw crossing
Ensure that the record player is secured with the transit screw during transport to prevent damage.
7. Tonearm lever
Use to raise/lower the tone arm.
8. Tonearm clip
This arm clip secures the tone-arm while at rest or when not in use.
9. Speed switch
Use the speed switch to select the correct platter speed:
33 1/3, 45, or 78 RPM, depending on the type of record being played.
10. Tonearm
The tonearm holds the needle and guides it smoothly across the record.
This tonearm has an automatic return function.
11. Cartridge with needle
When the turntable is not in use, it is recommendable to place
the removable protection cover over the stylus.
12. 45 RPM adaptor
This adaptor allows you to play 45RPM records.
13. Power jack connect included adaptor 12V, 2A
Connect the included 12V, 2A adapter here to power the turntable.
14. Speaker out jack -L channel
The audio output from a playing vinyl record is sent to this line-level
coaxial audio output. This must be connected to phono level devises.
15. Speaker out jack -R channel
The audio output from a playing vinyl record is sent to this line-level
coaxial audio output. This must be connected to phono level devises.
16. BT indicator LED light
Blue light flashes when disconnected and stays on when connected.
17. Charging indicator LED light
Red light is on while charging and turns off when fully charged.
18. TWS indicator LED light (True Wireless Stereo)
White light turns on when TWS function is active.
19. Power button
Short press to play or pause music, double press to switch between BT and Aux-in
modes, and long press to power on or off.
20. BT button
Double press to activate the TWS function; long press to disconnect BT function.
21. Volume/Track button (-)
Short press to decrease volume, long press to go to the previous track.
22. Volume/Track button (+)
Short press to increase volume, long press to go to the next track.
23. Aux in Jack
Connect an external device using a 3.5 mm audio cable.
24. DC IN charging port
Connect the included charger to charge the device.
5