Assembly; Lawn Mower; Trimmer - Zipper Maschinen ZI-RMTR40V-AKKU Betriebsanleitung

12

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore
12.1 Assembly

12.1.1 Lawn mower

1. Assemble the parts
together an fix them
with the 2 screws at the
base of the grass box
3. Install the upper
handle clamp.
Turn the clamping loose
by hand and then close
lever for fixing.
When unfold the mower avoid pinching or trapping
any cables!

12.1.2 Trimmer

1. To fit the
guard, align the
opening in the
guard with the
underside of the
trimmer head.
Tighten the four
screws to fix the
guard in place
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RMTR40V-AKKU
2. Pull up the lower
handle and fix the
handle with the lower
handle clamp.
4. Fix the upper handle
with the upper handle
clamp.
2. The plant guard is
inserted into the
holes provided in the
front of the head.
The plant guard can
be folded up when
not in use, or easily
removed.
ASSEMBLY
26