We.lock Core1KEY81 Bedienungsanleitung Seite 8

Installation pictures
1. Take out the screws and take out
the rear handle
3. Rotating square axle to align the
cam with the lock cylinder,install
the lock cylinder into the door.
5. Rotaing square axle to raise the
cam,insert allen key into the bottom
of lock cylinder.Insert the front handle
and adjust it to the fit position.
7. Install the rear handle to the fit
position.Rear handle screw holes
must be aligned with the square bar
locating holes.
2. Insert the allen key,take out the
front handle
4. Align the screw holes of the insert
with the screw holes of the lock
body,install fixing screw.
6. Pull out the screwdriver.
8. Fix rear handle screw
- 05 -