Selecting The Temperature - Imetec R5301 Gebrauchsanleitung

a. Press and hold the Program selector button (6) for 5 seconds, until the letters P and L light
up on the display
b. Press the Temperature selector button (7), so the display shows the letter P only
EN
c. Follow the instructions of the app, choosing the option "I don't have a QR code"
d. At the end of the procedure, press the ON/OFF button (17)
For the double bed model, repeat the pairing procedure for the second control device too.
The Wi-Fi LED (11) will flash during the pairing phase, then the fixed light will remain on. For the
control device to remain connected to the Wi-Fi network, the Wi-Fi button (16) must be in the
higher position (ON).
The control device can still be manually set even when the appliance is connected to the Wi-Fi network.
• If you need to disassociate the control device from your phone, first make sure the device is
switched off but connected to the mains supply.
IMPORTANT: The time needed for the heated mattress cover to warm up will depend
on the room temperature. The temperature of the heated mattress cover must be
evaluated by lying in the bed rather than just feeling it by hand.

SELECTING THE TEMPERATURE

The temperature can be set via the Alexa app or voice command, or by pressing the Temperature
selector button (2) on the control device.
The control unit can be set to the following temperature levels:
9: quick pre-heat temperature
8-6: medium pre-heat temperatures
5-1: temperatures for continuous or night-time use
At switch-on, the default temperature value is 9 and the timer (automatic switch-off) is set to 1 hour. To
pre-heat the bed quickly, use the maximum temperature 9. In warmer periods however, the bed can be
pre-heated by selecting temperature 8, 7 or 6 or by pressing the Temperature selector button (7) until
the required temperature LED lights up (8). The higher the number selected, the higher the temperature.
For continuous or all night use of the appliance, set the control
unit to temperature levels from 1 to 5 only.
To set the control device on the continuous use temperature from 1 to 5, press the Temperature
selector button (7) or select it via the Alexa app or voice command.
DO NOT get into bed with the control unit set to a higher temperature
than recommended for continuous use.
If the appliance is slept on with the controls set to a higher temperature
the user may suffer skin burns or heat stroke.
21