Custom Program (Prg) Settings; Temperature Calibration Setting - Thomson Milla Bedienungsanleitung

Set the minutes (00-59) with "+" / "-" , then press "
week (1-7).
Press "+" / "-" to set the day of week (choose from d1 to d7, d1=Monday, d7=Sunday).
Press " " to finalize. If no action is taken within 10 seconds, the device will auto-save and
return to the main interface.
Note:You must set the time/day before accessing other settings.

Custom Program (PRG) Settings

4.5.
Day of the
week
In the setting menu, press «+» or «-» to select « Pr », and briefly press «
weekly program adjustment interface (the modifiable program).
The default setting icon
day of the week « 1 » (1=Monday) flashes.
Adjust the day of the week using the button (1=MONDAY, 2=TUESDAY,... 7=SUNDAY), then
validate by pressing the button.
Press «+» to select the hour (1-24). For each hour, there are 2 alternate modes: Comfort
mode and ECO mode
Press «-» to choose between Comfort mode
To validate the selected program for day 1 (MONDAY): press the button
To complete the adjustment up to day 7 (SUNDAY): repeat the same operation multiple
times.
Press the M button to confirm after all adjustments; otherwise, the device will automatically
save the settings after 30 seconds and return to the operational interface.
With this mode, you can customize your heating programs according to your preferences.

Temperature Calibration Setting

4.6.
In the settings menu, press "+" or "-" to select "C", then briefly press "
temperature calibration setting interface. "0" will be displayed on the screen by default.
lights up, and the number representing the
. The Custom Program mode icon for the hour will flash.
EN
12
" to confirm and proceed to day of the
and ECO mode
Hour
» to enter the Pr
.
.
" to enter the