Operation - Philips Virtual Pinball Bedienungsanleitung

3. OPERATION
Playing with your "Virtual Pinball" involves your whole body as you push and jolt the
console. Always put the pinball machine on a solid table and secure your monitor properly.
If necessary, put your system unit on the floor or on a separate table to prevent the hard
disk being damaged.
Start the supplied game (before starting a different pinbal l game, see chapter 4, "Other
games"). Now use your pinball machine to operate the game. Put the keyboard in the recess
at the back of your pinball machine and off you go!
Pull the launch button on the front to bring a ball into play.
'
' '
I
,,
Use the push buttons on the left and right-hand sides to operate the flippers as usual.
Push or jolt the pinball machine forwards to influence the ball. As with a mechanical pinball
machine, some force is needed for this. Watch out for tilting.
•••T••••••
•••••••••••
•T ••
A
ENGLISH
I
~
NB. Some games react only to being pushed forward . Other games also react to being
pushed to the left and right.
Your keyboard can be used as usual during the game. However, if you hold down a key the
pinball game will be blocked.
If the software supplied or the pinball machine do not seem to work, check first whether
you have carried out all the steps in chapter 2 (first the software installation and then the
hardware installation). If it still does not work, see chapter 5 "Troubleshooting".
If a different pinball game does not seem to work with your pinball machine, see chapter 4
"Other pinball software" and possibly chapter 5 "Troubleshooting".
••• T ·~·••
ENGLISH
••••••••••••••T••
A