System Requirements; Pack Contents; Installation; Hardware - Philips Virtual Pinball Bedienungsanleitung

1.2 SYSTEM REQUIREMENTS
*
*
*
*
*
*
IBM-compatible PC 486 or higher
Standard PS/2 keyboard protocol
IBM-compatible PC 386, only with games suitable for 386.
CD-ROM drive
Keyboard connection via DIN or MINIDIN connector
Sound card recommended
1.3 PACK CONTENTS
The pack contains:
*
*
Your pinball machine including connection cables and I adapter plug
This manual
* Quick Start manual
* I pinball game (on CD-ROM).
2. INSTALLATION
2.1 SOFTWARE
First, install the supplied pinball software on your PC following the instructions with the
game.
Check that the game is working on your PC by using the keyboard (do not connect the
pinball machine yet!).
If the game does not work, locate the fault when installing the game software. In particular,
check the system configuration such as memory, sound card and video card: consult the
software manual and the DOS or Windows manual.
When the game is working with the keyboard, you are ready to connect your pinball
machine. See the next section, 2.2, about the hardware.
•••T
II
•
•
••
•• •T
ENGLISH
I
2.2
HARDWARE
Turn off the PC. Disconnect the keyboa rd plug from the PC and plug it into the appropriate
socket of your pinball machine (with the short cable). Use t he adapter plug if necessary (see
drawing). Take care not to damage the pins in the plug.
f,., , , ,
,.:J_
+
..
-
r,- , 1 ' I I"
~
(f
I'
I
Ji (
Ji
I
.
\
-
Connect the other plug of your pinball machine (with the long cable) to the keyboard port
of your PC. Use the adapter plug if necessary (see drawing).
Just to be sure, check that the settings of t he dip switches is correct for the game supplied .
For the correct settings, see chapter 4.
You are now ready for your first "Pinball Experience".
• II
•T•
II. •
.ENGLISH
I
••••••••••• •T ••