Safety Precautions - Montech Mkey Pro Benutzerhandbuch

•
Plug in the Dongle
Insert the 2.4 GHz dongle into your device's USB port. The MKey PRO should
o
connect automatically.
•
Manual Connection Mode (if the MKey PRO Does Not Connect
Automatically)
Press and hold FN+4 for three seconds to enter connection mode. The
o
number 4 key will flash a green light to indicate pairing mode, while the other
keys will remain off.
Note: If the connection process exceeds three minutes without a successful
o
pairing, the keyboard will revert to its original lighting effect. The flashing
green light will turn off, leaving only the backlight flashing for 40 seconds.
Wired USB Type-C Connection Guide
To use the keyboard in wired mode, follow these steps.
•
Switch to Wired USB Type-C Mode
Set the MKey PRO to USB Type-C (USB) mode using the dedicated switch at
o
the rear of the keyboard.
•
Connect the USB Type-C Cable
Insert the USB Type-C cable into the connector at the rear of the keyboard
o
and plug the other end into your device. This provides a reliable,
uninterrupted connection with continuous power.

Safety Precautions

To ensure safe and optimal usage of the keyboard, please observe the following safety
guidelines:
•
Child Safety
Keep the keyboard, accessories, and packaging out of reach of children to
o
avoid any choking hazards or accidental injuries.
10