Child Lock - LG WD-14312RDK Bedienungsanleitung

H ow to use washer

Child lock

If you choose to lock the buttons on the control
assembly to prevent tampering, this function
may be selected.
• Child lock can be set by pressing and holding
the Option and Rinse button simultaneously.
(About three seconds)
• When child lock is set, all buttons are inoperable
except for power button.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again.
(About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it is
automatically canceled when operational
errors occur. Also Child lock works when
power is off.
50
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse +
- Rinse ++
- Normal+Hold
- Rinse + +Hold
1. Normal
• Cotton, Cotton-Eco, Synthetic performs 3 Rinses
• Wool/Silk, Hand Wash, Quick 30, Delicate, Duvet
performs 2 Rinses
2. Rinse + & Rinse ++
• Used to additional rinse, which may assist in
removing traces of detergent residue.
• By selecting Rinse + or Rinse ++ function, the
Rinse Time and the Rinse water are
increased.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once the
rinse hold function is completed using to
program dial scroll to the required program.
The required lamp will light up for identification.