Important Assembly Information - Tunturi Rc20 Pro Power Rack Bridge Benutzerhandbuch

English
Welcome
Important Safety Instructions
The (RC20 Pro Power Rack - Bridge). is an
accessory for the (RC20 Pro Power Rack-Base
Rack) and cannot be used as a stand-alone trainer
or station. We therefore refer to (RC20 Pro Power
Rack-Base Rack) manual for safety and warranty
information as you cannot find in this assembly
manual.
You can download the User manual for the (RC20
Pro Power Rack-Base Rack) from our website at all
times.
The Owner's Manual is an essential part of your
training equipment: reading all instructions in this
manual before you start using this appliance. The
following precautions must always be followed:

Important assembly information

Before you start
We recommend to use two adjustable wrenches
to assemble your product. If you have metric size
wrenches in correct size this is fine too.
‼
NOTE
• Suitable (adjustable) wrenches are "NOT"
provided with the product, neither included
in the assembly kit.
Description illustration A
The illustrations shows you in the correct following
order how to assembly your trainer best.
⚠
WARNING
• Assemble the equipment in the given order.
6
Additional environmental information
Packaging disposal
Government guidelines ask that we reduce the
amount of waste material disposed of in land fill
sites. We therefore ask that you dispose of all
packaging waste responsibly at public recycling
centres.
End of life disposal
We at Tunturi hope you enjoy many years of
enjoyable use from your fitness trainer. However,
a Time will come when your fitness trainer will
come to the end of its useful life. Under 'European
WEEE Legislation you are responsible for the
appropriate disposal of your fitness trainer to a
recognised public collection facility.
Disclaimer
© 2024 Tunturi New Fitness BV
All rights reserved.
- The product and the manual are subject to
change.
- Specifications can be changed without further
notice.
- Check our website for the latest user manual
version.