DeLOCK 64336 Bedienungsanleitung

Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2025
Declaration of conformity
Products with a CE symbol fulfill the EMC directive (2014/30/EU) and
RoHS directive (2011/65/EU+2015/863+2017/2102), which were released by the
EU-comission.
The declaration of conformity can be downloaded under documents:
https://www.delock.de/produkte/G_64336/merkmale.html
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became
effective as European law on February 13th 2003, resulted in an all out change
in the disposal of disused electro devices. The primarily purpose of this directive
is the avoidance of electrical waste (WEEE) and at the same time the support of
recycling and other forms of recycling in order to reduce waste. The WEEE-logo
on the device and the package indicates that the device should not be disposed
in the normal household garbage. You are responsible for taking the disused
electrical and electronical devices to a respective collecting point. A separated
collection and reasonable recycling of your electrical waste helps handling the
natural resources more economical. Furthermore recycling of electrical waste is
a contribution to keep the environment and thus also the health of men. Further
information about disposal of electrical and electronical waste, recycling and
the collection points are available in local organizations, waste management
enterprises, in specialized trade and the producer of the device.
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
Hrvatski
Sigurnosne upute
• Zaštitite proizvod od vlage
• Zaštitite proizvod od izravne sunčeve svjetlosti
Instalacija
1. Spojite isporučeni USB kabel na USB Type-C™ priključak koncentratora i
slobodan USB priključak vašeg sustava.
2. Priključite Ethernet kabel u Gigabit Ethernet priključak za spajanje na mrežu.
3. Kada je čvorište spojeno na PoE+ ili PoE++ mrežu, uređaj spojen na host se
napaja.
4.
Uključite vaše računalo.
5. Upravljački program će se automatski pronaći i instalirati.
6. Sada možete početi koristiti koncentrator.
ελληνικά
Οδηγίες ασφάλειας
• Προστατεύστε το προϊόν από την υγρασία
• Προστατεύστε το προϊόν από την άμεση ηλιακή ακτινοβολία
Εγκατάσταση
1. Συνδέστε το συμπεριλαμβανόμενο καλώδιο USB στη θύρα USB Type-C™ του
κόμβου και μια ελεύθερη θύρα USB του συστήματός σας.
2. Χρησιμοποιήστε ένα καλώδιο Ethernet για να συνδέσετε μια θύρα Gigabit
Ethernet σε ένα δίκτυο.
3. Όταν ο κόμβος συνδέεται σε δίκτυο PoE+ ή PoE++, η συσκευή που είναι
συνδεδεμένη στη θύρα υποδοχής τροφοδοτείται με ρεύμα.
4. Ενεργοποιήστε τον υπολογιστή σας.
5. Θα γίνει αυτόματη ανίχνευση και εγκατάσταση του προγράμματος οδήγησης.
6. Τώρα μπορείτε να ξεκινήσετε τη χρήση του κόμβου.
User manual
Mode d'emploi
Uživatelská příručka
Manuale utente
Manual de utilizare
Korisnički priručnik
3 Port USB 5 Gbps Hub + RJ45
Gigabit LAN PoE++ Port
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1. Connect the enclosed USB cable to the USB Type-C™ port of the hub and a
free USB port of your system.
2. Use an Ethernet cable to connect the Gigabit Ethernet port to a network.
3. When the hub is connected to a PoE+ or PoE++ network, the device
connected to the host is supplied with power.
4.
Switch on your computer.
5. The driver will be found automatically and installed.
6. You can now start to use the hub.
Deutsch
Sicherheitshinweise
• Produkt vor Feuchtigkeit schützen
• Produkt vor direkter Sonneneinstrahlung schützen
Installation
1. Verbinden Sie das mitgelieferte USB Kabel mit dem USB Type-C™ Anschluss
des Hubs und einem freien USB Port Ihres Systems.
2. Verwenden Sie ein Ethernet-Kabel, um den Gigabit-Ethernet-Port mit dem
Netzwerk zu verbinden.
3. Wird der Hub mit einem PoE+ oder PoE++ Netzwerk verbunden, wird das an
den Host angeschlossene Gerät mit Strom versorgt.
4. Schalten Sie den Computer ein.
5. Der Treiber wird automatisch gefunden und installiert.
6. Sie können nun den Hub verwenden.
Bedienungsanleitung
Manual del usuario
Instrukcja obsługi
Bruksanvisning
Használati utasítás
Εγχειρίδιο χρήστη
Product-No: 64336
User manual no: 64336-a
www.delock.com