Cleaning & Maintenance - Bbluv Rino Bedienungsanleitung

CLEANING & MAINTENANCE
For reasons of hygiene, it is important to wash your Rinö before and after each
use. Please carefully follow the instructions.
Quick cleaning your Rinö
1. Make sure that the lower cover
place.
2. Remove the silicone
tip / .
A B
5. Every few times you
use the device,
detach the silicone
rings from the
E
collar to clean them.
8. Thoroughly wash the
collar, the pilar inside
as well as the air vent
with warm soapy
water before rinsing
under tap.
Air vent
NOTE: When using the Rinö, if the accumulated volume of mucus exceeds the safety limit or if
mucus drips out the air vent on the back of the collar, please deep clean your device.
has been firmly closed and locked in
I
3. Hold the mucus
collection cup
between your thumb
and your index finger.
6. Thoroughly brush and
rinse the inside and
outside of all the parts.
Ensure there are no
residues remaining.
9. Make sure all parts
are dry before
reassembling the
device. When
replacing the mucus
collection cup
, make sure it is
properly aligned with
the positioning hole.
4. Gently bend the mucus
collection cup
C
downwards to detach it
from the suction tube
7. Boil a pot with clean
water. Put the silicone
tip
A
, and the mucus
E
cup
C
and stir them for 3 to
5 minutes. The parts
can also be sterilised in
steam cleaners, or with
a UV sterilizer (such as
bblüv Üvi).Never use
your bare hands to
take out the parts out
of the boiling water to
avoid burns.
C
Rinö
EN
C
H
/ and rings
B
in the water
9 9
.