Personal Safety - Stier Basic+ Betriebsanleitung

Proper use
1. Before assembly, please check whether all
parts are present and undamaged.
2. Workbenches must be placed on a suitable
surface and perpendicular
3. When loading all workbench components,
ensure that the load is evenly distributed.
4. Workbenches are suitable for carrying out
assembly and repair work of all kinds.
Workbenches are not suitable for the storage
of unpackaged
substances.
5. Please also note:
o For your safety, always wear eye protection,
protective gloves and other appropriate
protective equipment.
o Only move the workbench when there are no
objects on the worktop.

Personal safety

5. Never stay under the table.
6. Don't overload the table.
7. Do not use the table on a slope/inclined surface.
8. Never get on the table.
3 Assembly
HINT
Carry out the assembly according to the
installation instructions. Complete each step
Step 1
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlin | DE |
food and hazardous
o Never stand on the workbench.
o Observe the load limit of 150 kg!
o Do not use the workbench as a ladder or
misuse it.
o Do not use the workbench if parts are broken
or bent.
o Do not disassemble the device and do not
attempt to repair it. The device does not
contain any parts that you can replace or
repair.
CAUTION
Beware of small parts! Risk of swallowing for small
children! Do not leave packaging material lying
around carelessly. Plastic bags etc. can become a
dangerous toy for children.
before starting the next. For production reasons,
sharp edges can occur. Therefore, wear gloves
during assembly.
We recommend that two people do the assembly.
When installing, first tighten all screws loosely and
finally tighten all screws vigorously.
Step 2
Assemble the joint for the folding mechanism.
info@stier.de
12