Safety Precaution - Stier Basic+ Betriebsanleitung

RESERVATION OF RIGHTS
STIER Industrial GmbH is not liable for the loss of data on sent devices. All indications known as
trademarks or service marks are highlighted accordingly. The use of this information should not affect
the validity or reputation of the trademarks or service marks. STIER Industrial GmbH reserves the right
to make changes, deletions or additions to the information or data provided if necessary. Technical
data, specifications and appearance are subject to change without notice and may differ in the
representations from the actual product.
Copyright 2025 STIER Industrial GmbH. STIER and the STIER logo are registered trademarks of STIER
Industrial GmbH
ONLINE MANUAL
By scanning the following QR code, you will get to the digital version of the operating manual. Please
enter the manufacturer number (904374) in the search field
Table of contents
1. Specifications

2. Safety precaution

3. Assembly
4. Use
1 Specifications
Construction
Worktop (material)
Worktop (Height)
Total load capacity
Weight
Dimensions unfolded
Dimensions folded
Height
2 Safety precaution
Read this instruction manual carefully before
operation to fully familiarize yourself with its use.
Improper operation can cause a hazard and
damage to the device. Only the complete
observance of all safety instructions allows the
product to be used as intended. Keep the safety
and operating instructions carefully for future use.
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlín | DE |
STIER Folding Workbench Basic+ (904374)
mm
kg
kg
mm
mm
mm
Keep all stickers on the device clean and visible.
However, the instructions in this manual do not
replace standards or additional (even legal)
regulations issued for safety reasons. The
distributor is not responsible for any damage or
injury caused by improper use or neglect.
Steel tube (powder-coated)
Laminated wood panel
25
150
15
1000 x 500 x 840
1000 x 500 x 200
approx. 840
info@stier.de
7
7
8
9
10