STIER Multi+ Betriebsanleitung Seite 21

8 Operation
8.1 Converting a lounger into a seat
1
.
8.2 Converting a couch into a seat
2.
This old equipment can be handed in to a disposal point, where it is disposed of in
accordance with the national Circular Economy and Waste Act. The device and its
accessories are made of a wide variety of materials. Defective components must be treated
as hazardous waste and disposed of in accordance with legal requirements.
The packaging is made of raw materials and can therefore be reused or taken to a collection point.
ES
Note
The operating instructions are subject to change without notice.
Our company does not take any responsibility for the loss of products.
STIER Industrial GmbH | Friedrichstraße 224 | 10969 Berlin | DE | info@stier.de
2.
1
.
4. Unlock the locking pin by pulling it backwards
until it is no longer in the locking hole.
5. Fold the middle section up.
6. Fold the seat over so that it is in a horizontal
position
3. Pull the locking pin to unlock the mechanism.
4. Now follow the steps explained in the previous
section in reverse order.
21