|
P R A E SI D I O
®
Instruction manual
7. Going into operation
7.4 Exchange of receptacle
Pull on the keyhole at the corner of the base and swivel the dispenser
forward.
Lift up the receptacle from below and remove it.
1
7.5 Insert of receptacle
2
To do this, swivel the dispenser and insert the filled receptacle.
The fill level can be checked via the inspection window or by opening
the appliance.
Remove the filling good before transport!
1
2
7.6 Remove/Insert clean tray
Remove the clean tray from the guides and re-insert it in the guides
after installation/cleaning.
27