Initial Configuration - AKO 5012 Schnellstartanleitung

Initial configuration

Step 1
-Using a mobile device, laptop or tablet, search for WIFI networks near the
AKO-5012.
-Among the networks found, connect to "akonet". The password is
akonet123.
Step 2
-Open the browser and enter the following address in the address bar:
10.0.0.1/setup
-Configure the language, date, time and time zone and press "submit".
Step 3
-Press "IP", configure the necessary data and press "submit". It is
recommended that you configure the device with a fixed (static)
IP. Ask your network administrator for the appropriate configuration
according to its infrastructure.
Step 4
-Option A: Open a web browser on a computer located in the same
Ethernet network as the web server and enter in the address bar the IP
configured in the previous step.
-Option B: If the system is connected to the AKO-5012 WiFi network, it
can also be accessed by typing in the AKOnet address 10.0.0.1 .
-To continue with configuration, go to the next page.
9
5012H001 Ed.02