Unpacking And Set-Up; Technical Specification - Homcom 852-021V70 Bedienungsanleitung

EN
Volts
220-240V
Ampere Rating
Not more
More then
0
6
10

UNPACKING AND SET-UP

1. Remove the tank cover by pushing in the side lugs with
thumbs and lifting up on the tabs of the tank cover (Figure 1).
2. Remove any accessories and paperwork, which may have
been shipped in the tank.
3. Replace tank cover on the tank by aligning tabs with lugs.
Press down firmly on the upper housing until tank cover
snaps into place.
TO AVOID HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT USE TO PICKUP
TOXIC, CARCINOGENIC OR OTHER HAZARDOUS MATERIALS SUCH AS
ASBESTOS, PESTICIDES OR OTHER HEALTH ENDANGERING MATERIALS.
CAUTION
EFFICIENCY OF THE VACUUM IS LARGELY DEPENDENT ON THE
FILTER. A CLOGGED FILTER CAN CAUSE OVERHEATING AND
POSSIBLY DAMAGE THE CLEANER. CHECK THE FILTER
PERIODICALLY AND REPLACE AS REQUIRED.

TECHNICAL SPECIFICATION

Product
Model
Wattage
Voltage
Cord Plug
Tank Capacity
Vacuum Pressure(max)
Wind Volume of Flow
Safety
• Due to continuous improvements in product, specifications are subject to change
without prior notice.
Total length of cord in feet
25
then
6 18
10 18
12 18
: KEEP FILTERS CLEAN.
Wet &Dry Vacuum Cleaner
852-021V70(ZD2116-20L-1200W)
1200W
AC220-240V~
H05VV-F 2*0.75m㎡
20 L
70in H20 .
74cfm
Auto Shut Float Valve &Overheat Safety Protection
50 100
AWG
16 16
16 14
16 14
5
150
14
12
12
TABLE A