Victure PC660 Bedienungsanleitung Seite 5

Setting up
1. Search"Tuyasmart" on Google Play or APP store or scan the QR code
below to download the App.
2 Open the app, finish the registration and login in according to the
prompts.
3. Power on the camera, reset it and wait about 30 seconds until you make
sure the camera is ready for connection. (You shall hear a double-beep
from it)
4. Make sure your phone is under a 2.4Ghz wifi and click"
upper corner of the home page.
5. Connect your camera according to the prompts. (Choose
Camera under the option of "Video Surveillance" ---Next---Connect
WiFi---Use Camera to Scan QR Code on Your Phone---Heard a Prompt
Tone(DI-)---Waiting
6. If you' re failed to set it up, please reset the camera (about 10 seconds)
and try again.
7. Any problem about our camera please contact our support email
bulletcam@govicture.com or search IIVicture IPCII on Youtube for
instructional operation videos.
for Connection---Connected
OR-Code for Tuyasmart App
App Store
3
on the right
Successfully).
Get it on
Google Play
Smart
to