Battery Replacement - Rexer Rx1040 Benutzerhandbuch

RECHARGE
Remove the torch from the hat, remove the protective rubber cap and connect the plug to a 5V USB port (PC,
notebook, tablet, network adapter, etc.). The red LED on the side of the torch indicates that the internal
battery is charging, while the green LED indicates that charging is complete
MODE OF USE
Press the Power/Dimmer button in the center of the flashlight to turn on the LEDs in High mode (100%
power). Press a second time to switch the LEDs to Medium mode (50% power), press a third time to switch
to Eco mode (25% power). Pressing a fourth time will turn the flashlight off
ON / DIMMER / OFF
BUTTON

BATTERY REPLACEMENT

Refer to qualified technicians or service centers