Wörlein soundmaster RCD1190 Sicherheits-/ Umwelt-/ Aufstellhinweise Seite 15

STATION INFORMATIONS
Press "MENU / INFO" repeatedly to cycle through the following information (if available).
DAB : Dynamic label segment (DLS)  Signal strength  Program type (PTY) 
Ensemble name  Frequency  Signal error rate  Bitrate codec  Date
FM : Radio text/ Program type (PTY)  Station Name  Mono-Stereo  Time  Date
DAB/ FM MENU
1. Press and hold "MENU / INFO" 2 seconds to access menu.
2. Rotate "VOLUME / OK" to scroll the through menu.
3. Press "VOLUME / OK" to save or enter.
4. Press „ 
/ BACK / Zzz" to go back in the menu.
DAB menu
[Full scan]: Scan for the DAB stations.
[Preset Recall]
Recalls stored stations
[Preset save]
Save station to preset
[Manual tune]: Tune to a
frequency/station manually.
[Prune Invalid]:
No or Yes (Remove all the invalid
station(s)
[ASA Alerts]: Alarm Safety Alerts setting
for status, location and alarm volume
[System Settings]
Systems setting are described in detail
on end of manual
The ASA (Automatic Safety Alert) function makes it possible to receive locally adapted warning
messages in DAB+ mode via the DAB+ signal.
Further information on the ASA function can be found online at: www.dabplus.de/asa
Important!
In order for the warning messages to be received correctly even in standby mode, the radio
must be connected to the power supply and in standby mode (the date and time are shown in
the display). If an ASA ensemble from a DAB+ station is received, [ASA] appears in the display
next to the time.
STATE
1. In the [ASA - Alerts] menu, use rotary controller to select [ASA - state].
2. Press "VOLUME / OK" button repeatedly to set the ASA - state to [ON].
3. Now, ASA ensemble to be monitored in standby mode.
ASA AUTOMATIC SAFETY ALERT)
(
RCD1190 / English Instruction Manual
FM menu
[Preset Recall]
Recalls stored stations
[Preset save]
Save station to preset
[Scan setting]
[All stations]: Scan all the available FM
stations.
[Strong stations]: Scan the strong FM
stations only.
[Audio setting]
[Stereo allowed]: Stereo broadcast.
[Forced mono]: to improve the reception,
change to monaural sound
[System Settings]
4