Setting The Clock - Wörlein Soundmaster Rcd1190 Sicherheits-/ Umwelt-/ Aufstellhinweise

VOLUME
Rotate "VOLUME / OK" for increase or decrease volume level.

SETTING THE CLOCK

The clock on your radio is automatically set when first used from the time signal broadcast with
DAB radio stations.
If a DAB station is not available, the clock may be set manually via the system menu.
1. Press „
/ MODE" button repeatedly to select the DAB.
The unit automatically perform full scan at first switch on.
If no stations found, DAB menu will be displayed.
Press and hold „
2.
This product automatically stores radio stations with sufficient signal strength.
After the search is complete, the first stored radio station is broadcast automatically.
Press „ / TUNE+" or „ / TUNE-" repeatedly to select a station for listening.
3.
1. Press "
/ MODE" repeatedly to select FM.
2. Press and hold " / TUNE+" or „ / TUNE-
[Scanning...] is displayed.
The unit tunes to a station with strong reception automatically.
3. Repeat step 2 to tune to more stations.
MANUAL TUNING
Press „ / TUNE+" or „ / TUNE-
Each press increases or decrease the radio frequency by 0.05 MHz.
AUTO SCANNING & STORING
You can program a maximum of 40 pre-set FM radio stations.
1. In FM mode
2. Press and hold „
The unit stores all the available FM radio stations.
The first stored radio station is broadcast automatically.
DAB / FM PRESET STORING & RECALL
STORING
1. Tune to desired radio station.
2. Press and hold one of the 4 preset buttons to store the preset station or press
"PRESET / +10" for 2 seconds to enter [Preset Store] option.
3. Rotate "VOLUME / OK" to allocate preset number (1 to 40) to this radio station, then press
"VOLUME / OK" . The [Preset "#" stored] are displayed.
4. Repeat the above of steps to store other stations.
Note: To remove a pre-stored station, store another station in its place.
RECALL
1. Press 1-4 button to recall preset or press "PRESET / +10" button to enable preset recall.
2. Rotate "VOLUME / OK" for select the requested station.
3. Press "VOLUME / OK" to confirm the selection.
/ SCAN" to perform scanning.
" repeatedly until you find better reception.
/ SCAN" for 2 seconds to perform auto scanning.
RCD1190 / English Instruction Manual
DAB
FM
"
for 2 seconds.
3