Fnirsi LPM-10A Benutzerhandbuch Seite 85

2.5 Multifunctional Intelligent wire tracing
① Power Indicator: Indicates the
system power.
② Alarm Indicator: Reports error
warnings during the wire tracing
test.
③ Volume Indicator: Indicates the on
status of the device volume, and the
icon disappears when the volume is
turned off.
④ Network Cable Docking: The
function is network cable docking
detection, which enables fast and
convenient network cable
connection.
⑤ Cable/wire Tracing Measurement: The function is wire tracing, which
is divided into anti-interference wire tracing and ordinary wire tracing.
It is used for network cabling, detection and maintenance, and can
quickly locate the target cable.
⑥ Port Flashing: The function is port flashing, which can quickly locate
and identify the network port connected to the wire tracing.
⑦ Length Test: The function is a length test, which measures the
propagation time of the electrical signal in the cable to calculate the
length of the cable. There are three units for measurement: inches,
centimeters, and meters.
⑧ Crimp Test: The function is a crimp test, which ensures stable and
accurate transmission of network signals by detecting the electrical
connection between the internal metal sheet and the core wire of the
network cable.
⑨ Network cable speed: The network speed can be quickly measured in
duplex mode.
⑩ POE test: The test includes: power supply line pair, switch standard,
power supply mode, standard protocol, power level.
⑪ Settings: This function module can set language, screen brightness,
volume, automatic shutdown, about (device information and restore
factory settings)
Button Operation
Short Press
Long Press
3
Cable Test
4
FLASH
6
Function
Operation Return Button
Device Power On/Off
04
2 1
SCAN
Length
5
7