Environmental Information - Electric House 69532 Gebrauchsanweisung

INSTRUCTION MANUAL
Use
Position the fan heater so that it stands upright on
a firm surface and at a safe distance from wet
environments and flammable objects.
Connect the fan heater to the mains.
Set the thermostat button (1) to the maximum
temperature.
The fan heater will switch on when the function
selector (3) is set to one of the three power
settings.
Once the room reaches the required temperature,
you should turn the thermostat dial slowly
counter-clockwise until the fan heater switches off.
The fan heater now starts and stops automatically
and thus keeps the room temperature constant.
The fan heater is switched off by turning the
function selector to „0".
ENGLISH
Cleaning
The fan heater must be disconnected from the
mains and cleaned using compressed air.

Environmental information

You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
16