The Charger Porty Lithium - Hensel POWER MAX L Bedienungsanleitung

9 The charger Porty Lithium

ATTENTION!
The battery pack must only be charged with a genuine Hensel
charger Porty Lithium. (code no. 5672)
The micro chip controlled charger has an input voltage range
of 90-240 VAC. The charge time is under 1.5 hours. After
approx. 45 minutes, the battery has reached a charge level of
approx. 80% maximum capacity (depending on the capacity
and age of the battery).
The charge level is indicated on the charge indicator 10 resp. E.
Charging the battery is done via the charge socket located on
the battery 13. The battery can be inside or out of the Power
Max L during charging.
F
E
D
C
A ...... Charge cable
B ...... Start charging Wake Up
C ...... Error indicator Error (red)
D ...... Charge indicator Charging (yellow)
E ...... Charge level indicator Full (green)
F ...... Power check Power (red)
HENSEL-VISIT GmbH & Co. KG
Power
Full
Wake Up
Charging
Error
B
User manual Power Max L
A
43