Operating The Device - Aiper Hydrocomm Pro Bedienungsanleitung

• Recall Button:
Once the device is paired with an Aiper Robotic
Pool Cleaner, press and hold
recall the device to the pool's waterline.
Note:
To save power, the device's LED status indicator remains off during regular working. Pressing any button
briefly will light up the LED status indicator.

3.6 Operating the Device

For initial use, remove the storage cover for Probe 01.
1. First, unscrew the outer shell by pulling down in a clockwise motion to remove it. Then, unscrew and
slide down the white bottom cap to access the probe.
for two seconds to
93