EN
The device is ready for cooking.
5. Open the lid, place a sandwich, meat, or other food on the lower cooking plate,
then close the lid.
6. When cooking is finished, the buzzer will sound again.
7. Remove the food and switch off the power.
Notes:
During automatic mode, you can adjust the cooking time and/or temperature according
to your personal preferences.
If you wish to change the settings during an active program, press the heating or timer
icon, turn the knob, and confirm the change by pressing it.
Remove food using a plastic or silicone spatula. Never use metal knives or sharp ob-
jects, as they may damage the non-stick coating of the cooking plates.
Error codes
DISPLAY
If other malfunctions occur that require special tools, please visit the designated ser-
vice center for replacement or contact the official customer service for assistance.
Emergency measure: If continuous smoke starts coming from the appliance during use,
immediately switch it off, unplug it from the socket, and contact customer service.
Cleaning and maintenance
• Always unplug the grill from the power outlet before cleaning and allow it to cool
down. The grill is easiest to clean when slightly warm. There is no need to disassemble
the grill. Never immerse the grill in water or place it in the dishwasher.
• Wipe the cooking plates with a soft cloth to remove food residues. Burnt-on resi-
dues can be loosened by moistening with a mixture of warm water and dish soap or by
36
CAUSE
Circuit interrupted
Short-circuited circuit
Overheat protection
activated
Test mode activated
SOLUTION
Contact customer service
Contact customer service
Turn off the device, let it cool
down completely, then turn it
on again
Turn off and restart the device