Fulcrum Racing Zero DB Benutzerhandbuch Seite 26

®
• Fit the first bead of the tyre into the rim groove (Fig. 7) starting from the
point opposite the valve.
A
• Bend the tyre to fit the second bead into the groove on the rim (Fig. 8)
starting on the part opposite the valve and continuing along the rim's entire
circumference (Fig. 9).
NOTE
TO PREVENT DAMAGING THE TYRE IT IS NECESSARY TO COMPLETE THE INSER-
D
B
TION OF ITS BEAD EXACTLY IN CORRESPONDENCE WITH THE VALVE (FIG.10).
• Check that the tyre is positioned correctly on both sides of the valve zone
C
(Fig. 10).
7 8
A - TYRE
B - WHEEL RIM
C - GROOVE
D - BEAD
9 10
7