BMZ POWER2GO PRO Bedienungsanleitung Seite 7

In reference to electronic protection execution, in form of electronic fuse or switching
o
concept, during unwanted short circuit situation at the end of the extension cable or within
the loads or system, the length of the extension cable plays a big role in this effect. For the
real value of load detection or tripping timing, wire resistance between outlets though load
must not exceed 0.55Ω. A wire with 2.5mm
an equivalent resistance of around 0. 55Ω. (contact resistance from plug and socket is not
included).
•
Load or system electrical inspection monitoring and maintenance. Frequent monitoring of load
or system by electrical specialists are judged or regulated. (In reference to DGUV Regulation 3
in Germany)
WARNING
◼
Please do not put your fingers or any metal conductor inside the AC socket to avoid
electric shock.
◼ Before connecting the AC power supply device, make sure that the voltage and power
of the device are consistent with the output voltage and frequency of the BL8091A-
PRO.
◼
It is forbidden to connect the AC output of the BL8091A-PRO with its own AC input,
otherwise the BL8091A-PRO will be damaged.
◼ BL8091A-PRO supports simultaneous charging and discharging, i.e. Bypass function.
When input and output power is in max load the charging power will automatically be
decreased so total bypass power will not be that big to trigger the product and home fuse
breaker. The moment the combined load reaches the threshold, either the building
breaker or the product breaker will trip off.
◼ When the main power switch is turned OFF, everything is turned off at the same time.
◼
The mains socket outlet that supplies the product shall be installed near the product and
shall easily be accessible.
CAUTION
Be cautious to prevent injury when moving heavy objects.
EN
cross sectional area with around 40 meters has
2
EN
5