BMZ POWER2GO PRO Bedienungsanleitung Seite 4

GENERAL SAFETY HANDLING RULE
◼ No one other than qualified personnel shall attempt to modify or replace the internal parts
of this machine. If necessary, take it to an authorized service center, as incorrect reassembly
may result in a risk of fire or electric shock.
EN
◼ Always operate or store the appliance according to the stated temperature range.
◼
Do not expose the unit to fire, liquids, dirt, or other contaminants, as this may result in fire
or electric shock.
◼
Outlet of BL8091A-PRO must not be short circuited.
◼ Switches, control elements, plug/s, socket, outlets of BL8091A-PRO must not be attenuated
and modified. Replacement must only be done by trained personnel.
◼ The electrical contacts (AC inlet and AC outlet) must not be touched with fingers, tools, or
other objects.
◼ Do not place the unit on unstable or inclined surfaces. To prevent injury, the positioning of
the BL8091A-PRO must be ensured when in use or connected to loads. This will avoid
falling and falling over BL8091A-PRO. In connection with this, cables connected to
BL8091A-PRO must be organized and laid safely. The cables must not be placed under
strain conditions, either clamped under BL8091A-PRO or system loads, or anything that will
give equivalent strain on it.
◼ Damage against dropping or falling must be avoided. BL8091A-PRO must be laid on stable
positioning and be placed on a non-slippery base. Ensure BL8091A-PRO is secured against
falling or dropping.
◼ In all instances, BL8091A-PRO must be checked for damage after falling or dropping.
Should there be external and obvious severe visible damage, the BL8091A-PRO must no
longer be used. The exemption to this is damage on the tubular railings or handlebar. In
case of the said damage, make sure the BL8091A is POWERED OFF. Immediately reach
customer service when this situation occurred.
◼
Falling objects that will hit BL8091A-PRO must be avoided. In all instances, BL8091A-PRO
must be checked for damage after falling or dropping. Should there be external and obvious
severe visible damage, the BL8091A-PRO must no longer be used. The exemption to this
is damage on the tubular railings or handlebar. In case of the said damage, make sure the
BL8091A-PRO is POWERED OFF. Immediately reach customer service when this situation
occurred.
◼ Do not operate BL8091A-PRO if the power cable neither for the AC inlet and AC outlet
exhibit damage on the insulation.
◼
If mishandled or used inappropriately, fluids and vapors, can escape from the battery of
BL8091A-PRO. In the event of contact with this, fluid must be thoroughly washed off with
water. If in contact with vapors, fresh air must be supplied since vapor can irritate the
respiratory system. Consult and reach the doctor if symptoms persist. BL8091A-PRO
having this kind of event must no longer be used.
◼ Local regulations governing the low-voltage systems and safe operation of electrical loads
must be always complied.
◼ Please make sure that the place where you are using the unit is well ventilated and spacious.
2