Opis FunkyFon Handbuch Seite 3

Introduc• on
Welcome to the Opis FunkyFon cable, your new funky retro-styled fi xed-line rotary
phone. This short manual provides you with a quick start guide to get you up and run-
ning in no " me.
Quick Start
❶ Assembly
Unpack phone, receiver, phone cable and adapters from the box. Plug the receiver into
the bo# om of the phone (1). Plug the phone line cable into the bo# om of the phone
(2) and connect it to your phone outlet.
Note: In many countries you may have to a# ach an adapter to the phone line cable
before being able to plug it into your phone outlet. Several adapters are included with
your Opis FunkyFon cable, but if the one for your country should be missing, it is easy
to obtain one from a local electronics shop.
❷ Make a call
Pick up the receiver, wait for the dial-tone and dial the number:
Format:
Example:
Tip: You can Redial the last number by dialling #/R instead of the <phone number>.
❸ Receive a call
Pick up the receiver to accept a call.
❹ Controlling the electronic ringer volume
The electronic ringer volume can be set to low (LOW) or high (HI).
Format:
Example:
E N G L I S H
<phone number>
if the number is 0123456789: 0123456789
⇒ You will now be connected to the dialled number.
Slide to LOW (phone does not ring) or H I(phone rings)
if you want to set to low volume: Slide to LOW
⇒ Every incoming call will now be indicated by the phone ringing
silently.
3