Proove Rapture Bedienungsanleitung Seite 7

To Windows:
1. Right-click the speaker icon on the taskbar and select "Sounds".
2. Set the "PG Rapture" device as the default value in the "Playback" tab.
3. Set "PG Rapture" as the default value in the "Recording" tab.
Note: the first time you use the headset, it must be set up as both an input device and an
output device.
Connecting to PS4/Pro and PS5:
1. Turn on your game console.
2. Insert the dongle into the console's USB port, the driver will be installed automatically. The
orange LED on the dongle will remain lit.
3. When turned on, the headphones will enter pairing mode and automatically connect to the
dongle.
Note: If the headphones are not connected, you can disconnect and reconnect the dongle
to enter active pairing mode – this will be indicated by the alternating blinking of the green
light on the indicator light.
4. When the headphones and dongle are paired, the indicator light on the dongle will turn
green.
5. Go to the Settings menu.
6. Scroll down to "Devices" and select it.
7. Scroll down to "Audio Devices" and select it.
8. Set "Input Device" to "PG Rapture Wireless Headphones".
9. Set "Output Device" to "PG Rapture Wireless Headphones".
10. Select "Headphone Output" and select "All Audio".
Functions
Turning 7.1 surround sound on/off:
1. Long press the "M" button for 1 second to turn on the 7.1 surround sound effect.
2. Press and hold the "M" button for 1 second to turn off the sound effect.
Turning off/on/reducing the backlight mode:
1. Press the "M" button twice to turn off the decorative backlight when the light indicator is on.
2. Press the "M" button twice to turn the decorative backlight on when it is in the off state.
(Defaults to the last state when turned on, constant or gradual flux).
3. A short press of the "M" button allows you to switch between two modes: constant or
gradual flux. (The default state when the headphones are turned on is decorative
illumination).
3