Product Operation - Proove Rapture Bedienungsanleitung

Product operation

LED indication of wireless headphones:
Device is on
Connection status
Standby mode
Low battery power
Charging mode
LED indication of the dongle :
Device is on
Device in connection
mode
Connecting to
headphones
Connection status
Disconnection
Standby mode
Turn on the adapter
Connecting to a PC:
1. Insert the dongle into the USB port of your computer, the driver will be installed
automatically. The orange LED on the dongle will remain lit.
2. When turned on, the headphones will enter pairing mode and automatically connect to the
dongle.
Note: If the headphones are not connected, you can disconnect and reconnect the dongle
to enter active pairing mode – this will be indicated by the alternating blinking of the green
light on the indicator light.
3. When the headphones and dongle are paired, the indicator light on the dongle will turn
green. You can now listen to music, play games, make voice calls, video chat, etc.
The blue indicator lights up and the device enters pairing mode
Red/blue light flashes alternately
Blue light is on
Red light flashes every 5 seconds
The red light is on while charging. When the device is charged,
the red light turns off and the blue light turns on.
Orange indicator lights up for 1 second
Green light flashes alternately
Green light is on
Green light flashes alternately
Green light flashes
Green light flashes
Green light is on
2 2