We.lock PCB11KEY74 Bedienungsanleitung Seite 10

Installation pictures
1. Take out the screws and take out
the rear handle
3. Rotating square axle to align the
cam with the lock cylinder,install
the lock cylinder into the door.
5. Rotaing square axle to raise the cam,
insert screwdriver into the bottom of
lock cylinder.Insert the front handle
and adjust it to the fit position.
7. Install the rear handle to the fit position.
Rear handle screw holes must be aligned
with the square bar locating holes
2. Insert the screwdriver,take out the
front handle
4. Align the screw holes of the insert
with the screw holes of the lock
body,install fixing screw.
6. Pull out the screwdriver.
8. Fixed rear handle screw