CLEANING AND MAINTENANCE
Prior to cleaning, always remove the batteries from the
battery compartment!
Use a damp cloth to clean the outer casing. Make sure
that no water gets inside the openings. Dry off all parts
thoroughly after cleaning.
Attention! Do not use alcohol, acetone, benzene,
scouring cleaning agents, etc., to clean the synthetic
parts of the device. Do not use hard brushes or
metallic objects.
Removing the shaving head, cleaning the blades
1. Turn the shaving head counter clockwise until it loosens and can
be removed.
2. Carefully remove the blade element from the revolving axis
underneath.
Caution! The blades are sharp!
3. Clean the blades as well as the interior of the device with a small
brush.
4. Place the blade back onto the rotating axis and screw the shaving
head back on clockwise.
TECHNICAL DATA
Batteries: 3V
RSGX-761_A6_4305615398433_160707.indb 14
, 2 x 1.5V, Type R6/LR6/AA
14
7/7/16 10:39 AM