TecTake 405990 Anleitung Seite 2

Operation Instructions
The white light indicates that the button is on, while the blue light indicates that the
button is off.
Short press to turn on the light and switch between three color temperatures:
white light, warm light, and neutral light.
Long press to adjust the brightness of the light.
Short press to start defogging.
Line installation
Please ensure that the home circuit is turned off before beginning the
installation.
The following steps require professional operation throughout the entire process:
① Insert the live wire (brown), neutral wire (blue), and ground wire (yellow green)
of the product into the interior of the terminal.
② Use the same method to connect the live wire, neutral wire, and ground wire in
the home circuit in a one-to-one correspondence.
③ Ensure that the copper wire is fully seated within the terminal.
④ Use a screwdriver to tighten the screws on the upper part of the terminal.
⑤ Gently pull the wire to ensure that the terminal and the wires are secure and will
not come loose.
⑥ After completing the steps outlined above and ensuring safety, turn on the power
and verify that the circuit is functioning correctly.
SPECIFICATION
Name
Wattage
Color Temperature
Lifespan
Input Voltage
Degree of Protection
LED BATHROOM MIRROR
60W
3000-6000Kelvin
10000Hrs
AC220-240V, 50Hz
IP54
2