IMPORTANT
Connection
This equipment has been designed to one of the following safety classes. The appropriate
warning should be observed.
Safety Class 1
Safety
Class 2
Before connecting the equipment to the mains electricity supply, please examine the infor-
mation on the rating label affixed to the equipment.
Ensure that the supply is single phase alternating current ( a.c ) of the state frequency (Hz)
with Neutral nominally at earth potential.
Check that the supply voltage is within the stated range.
The equipment rating label states the value of the input fuse fitted to the apparatus itself.
Ensure that the plug or outlet circuit is fitted with an appropriate fuse of higher value.
For safety class 1
The wires in the mains lead are coloured in accordance to the following code.
Green
Blue
Brown
Connect these wires to a non-reversible 3-pin plug as follows;
Green
and Yellow
wire
Blue
wire
to terminal
Brown
wire
to terminal
For safety class 2 - Double Insulated
The wires in the mains lead are coloured in accordance to the following code.
Blue
Brown
Connect
these wires to a non-reversible
LIVE
PARTS
SHOULD
CHED
OFF AND
INSULATED
ELECTRICAL
.to the mains electrical
THIS
EQUIPMENT
THIS
EQUIPMENT
and
Yellow
-
Earth
Neutral
Live
to terminal
marked:
marked:
marked:
Neutral
Live
3-pin plug as appropriately
NEVER
BE EXPOSED
FROM
THE
SAFETY
MUST
BE EARTHED
MUST
NOT
BE EARTHED
(E)
E ( earth ) or G ( ground ) or
or coloured
Green
N ( neutral ) or common
L ( live ) or Phase or coloured
(N)
UNLESS
THE
EQUIPMENT
MAINS
ELECTRICITY
IKA@-VVERKE
GMBH
& CO KG
NOTICE
supply
-L
—
or Green
and Yellow
or coloured
Brown
directed
above.
HAS
BEEN
SUPPLY.
Blue
SWIT-