Synapse NeuRx Gebrauchsanweisung Seite 16

Stimulus Control Settings Buttons
7.1.5
Channel specific parameters are modifiable by using the
7.1.5.1
following buttons:
SELECT
ON:OFF
AMP
PW
General timing parameters modifiable by using the following buttons:
BPM
INSP
FREQ
RAMP
Selects the channel number for modification with the up/down
arrows. The selected channel number is indicated by a '>'
symbol on the LCD display.
Toggles channel enable status.
Selects amplitude to modify with the up/down arrows.
Selects pulsewidth to modify with the up/down arrows.
Selects breaths-per-minute to modify with the up/down
arrows.
Selects inspiration time to modify with the up/down arrows.
Selects pulse frequency to modify with the up/down arrows.
Selects pulse ramp modulation to modify with the up/down
arrows.
16