Connecting Digital Audio Equipment; Connecting The Controller - Sony Bravia KDL-22PX300 Benutzerhandbuch

Connecting digital audio
equipment
By using a commercially available optical digital cable, you can enjoy
surround sound with the effect of being in a movie theatre or a concert hall.
When connecting the built-in PlayStation
digital connectors, refer to the instructions supplied with the device to be
connected.
Connected device
DIGITAL IN
OPTICAL
Commercially available optical
digital cable
Hints
• If you connect the built-in PlayStation
digital cable, it may affect the audio output of some PlayStation
software with the result that no sound is produced. If this happens, use a cable such
as the Audio cable (not supplied) and connect it to the TV's AUDIO OUT. Do not
use an optical digital cable.
• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the
System Configuration menu. For details, see "Digital Out (Optical)" (
• The DIGITAL AUDIO OUT (OPTICAL) connection outputs digital audio from
the built-in PlayStation 2.
TM
2 to audio equipment with
TM
Built-in PlayStation 2 rear
TM
2 to audio equipment using an optical
TM
2 format
TM
page 29).

Connecting the controller

1
Insert the Analog Controller (DUALSHOCK
port of the built-in PlayStation
Built-in PlayStation 2 front
TM
Analog Controller
(DUALSHOCK
Hint
Some software titles designate a specific controller port to be used. Refer to the
instructions supplied with the software for details.
2) into a controller
®
2.
TM
2)
®

Connecting digital audio equipment

GB
5