MOB PIXIPRINT Benutzerhandbuch Seite 6

MEASURE AND SECURITY
1. Recommend to use high quality class 10 micro SD card, max support 32GB with FAT 32
format.
2. Please use 5V-1A adaptor to charge the camera (not included), lower or higher than these
voltage can harm the battery and circuit.
3. Don't loosen the USB connection and plug out the micro SD card while downloading file
from camera.
4. Do not recommend to use camera when it is in charging.
5. When the camera fill light is turned on, do not aim it at the child's eyes to avoid injury.
6. When the camera can not print, please check whether the paper installed correctly and
whether the print mode is turned on.
7. Do not put the product near fire or strong magnetic field.
8. The packing contains important information. Retain for future reference.
9. This product is for indoor use only.
10. This product has built-in rechargeable lithium battery, please do not pollute the
environment when disused and try to classify and recycle as much as possible.
11. CHOKING HAZARD Small parts, not for children under 3 years.
12. When the camera fill light is turned on, do not aim it at the child's eyes to avoid injury.
13. Regularly check the integrity of the toy. If there are any obvious damaged parts, please
stop using it and keep it away from children. Do not let children play with disintegrated,
damaged or deformed toys to avoid accidental swallowing, suffocation and other hazards.