Connect To Computer - Mob Pixiprint Benutzerhandbuch

GAMES MODE
- Choosing Games : select the game press the ▲▼ button to select, then press ② to enter the
selected game.
- 5 games: Snake/Maze/Sokoban/Tetris/Pinball. Basic game commands : ① move leftward;
② move rightward; ▲ move upward/rotate in Tetris; ▼ move downward.
- Press ④ to exit game and go back to menu.
SETTINGS
Press ▲▼ to select different configurations, press ② to enter the selected one and press ④
to go back to settings menu.
Language: select your preferred interface language.
Print Density: select black printing intensity, 3 or 4 is recommended.
Print Modes: select the printing style, Dot Print is recommended.
Date/Time: set the date and time of the Pixiprint.
Volume: set the volume level with ▲▼
Video Resolution: choose video quality
Camera Resolution: choose photo quality
SD Format: format the micro-SD card. Warning: this will erase the memory card.
Auto Power OFF: select the time after which the device will go into auto OFF
Screen Savers: select the time after which the device will go into standby mode
Cyclic Record: select cyclic record time
Screen frequency: choose screen frequency, 60hz is recommended
Default Setting: restore the initial configuration of all setting options.
Version: to find out the software version infos of the Pixiprint

CONNECT TO COMPUTER

- Please make sure the memory card is readable by the camera and connect camera(ON
status) to PC by USB cable.
- Camera screen will show TF card icon, which indicates that the PC has detected the TF
card and is automatically installing the camera drive.
- When you open the disk, you can see 3 file folders in it : VIDEO (videos you take will be
stored in it), PHOTO (Photos you take will be stored in it), MP3: Copy songs (MP3 format).