Cleaning And Maintenance - Amazonbasics B07T2C9Btt Bedienungsanleitung

Press to activate/deactivate the evaporation function
EVA./ (tumidifyingfunction).
COOLER Note:Thisfunctionis not available whenthe water
level is below
NOTICE When the water level is below the MIN mark, the water
pump stops running. 3 audio signals sound and the EVA./COOLER
button indicator light is flashing. Fill the water tank to continue operation.
Adjust the position of the louvers by hand.
Cleaning and Maintenance
A WARNING
Risk of electric shock! To prevent electric shock,
unplug the product before cleaning.
A WARNING
Risk of electric shock! During cleaning, do not
immerse the electrical parts of the product in water or other liquids.
Never hold the product under running water.
Cleaning
Wipe the product with a soft, slightly moist cloth.
•
Dry the product after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers,
•
metal or sharp utensils to clean the product.
Clean the dry honeycomb filter with a vacuum cleaner
To clean the small front filter, remove it from the drawer and shake off
•
the collected dust.
Decalcify the bottom water tank regularly and before storage: Add
500 ml of vinegar and 1000 ml of water to the tank, swish it around
so that it covers the bottom
for at least 1 hour. The vinegar acts as a natural cleanser that loosens
buildup trom the bottom ot the water tank. Rinse the tank thoroughly.
the MIN mark.
and sides of the bottom tank.
EN
Let it sit
9